qlpycon/install.sh

#!/usr/bin/env bash
#
# qlpycon installer
# Usage:
#   pipe2bash:
#   curl -sSL https://6bit.ch/qlpycon/install.sh | bash
#
#   local:
#   mkdir qlpycon
#   cd qlpycon
#   chmod u+x install.sh
#   ./install.sh
#
#   or run directly from cloned repo:
#   git clone https://git.6bit.ch/xbl/qlpycon.git 
#   cd qlpycon
#   chmod u+x install.sh
#   ./install.sh
#

set -e

TAR_URL="https://6bit.ch/qlpycon.tar.gz"
BIN_DIR="$HOME/.local/bin"
BIN_PATH="$BIN_DIR/qlpycon"

# === Colors ===>
RED='\033[0;31m'
GREEN='\033[0;32m'
YELLOW='\033[1;33m'
CYAN='\033[0;36m'
MAGENTA='\033[0;35m'
NC='\033[0m'

info()    { echo -e "${CYAN} o_o    [INFO]${NC} $*"; }
success() { echo -e "${GREEN} ^_^ [SUCCESS]${NC} $*"; }
warn()    { echo -e "${YELLOW} >_<    [WARN]${NC} $*"; }
die()     { echo -e "${RED} x_x   [ERROR]${NC} $*" >&2; exit 1; }

# === Checks ===>
check_dependencies() {
    info "Checking dependencies..."

    command -v python3 >/dev/null 2>&1 || die "python3 is required but not installed"

    # Check Python version >= 3.9
    python3 -c "
import sys
if sys.version_info < (3, 9):
    print('Python 3.9+ required, found ' + sys.version)
    sys.exit(1)
" || die "Python 3.9 or higher is required"

    command -v pip3 >/dev/null 2>&1 || \
        python3 -m pip --version >/dev/null 2>&1 || \
        die "pip is required but not installed"

    success "Dependencies OK"
}

# === Source detection ===>
detect_source() {
    if [[ -f "./main.py" && -d "./lib" ]]; then
        echo "repo"
    else
        echo "download"
    fi
}

# === Download ===>
download_and_extract() {
    info "Downloading to temp and extracting to $INSTALL_DIR..."

    mkdir -p "$INSTALL_DIR"

    TMP_TAR=$(mktemp)

    if command -v curl >/dev/null 2>&1; then
        curl -sSL "$TAR_URL" -o "$TMP_TAR" || die "Download failed"
    else
        wget -qO "$TMP_TAR" "$TAR_URL" || die "Download failed"
    fi

    if ! file "$TMP_TAR" | grep -q 'gzip'; then
        rm -f "$TMP_TAR"
        die "Download failed or URL returned invalid content"
    fi

    # Preserve existing config if updating
    if [[ -f "$INSTALL_DIR/qlpycon.conf" ]]; then
        warn "Existing qlpycon.conf found - keeping it"
        tar -xzf "$TMP_TAR" -C "$INSTALL_DIR" --exclude='qlpycon.conf' || die "Extraction failed"
    else
        tar -xzf "$TMP_TAR" -C "$INSTALL_DIR" || die "Extraction failed"
    fi

    rm -f "$TMP_TAR"

    success "Extracted to $INSTALL_DIR"
}

# === Venv ===>
setup_venv() {
    info "Setting up Python virtual environment..."

    if [[ ! -d "$INSTALL_DIR/venv" ]] || [[ ! -f "$INSTALL_DIR/venv/bin/pip" ]]; then
        python3 -m venv "$INSTALL_DIR/venv" || die "Failed to create venv"
    else
        warn "venv already exists - skipping creation"
    fi

    info "Installing pip"
    "$INSTALL_DIR/venv/bin/pip" install --quiet --upgrade pip
    info "Installing pyzmq via pip"
    "$INSTALL_DIR/venv/bin/pip" install --quiet pyzmq

    success "Virtual environment ready"
}

# === Launcher ===>
write_launcher() {
    info "Writing launcher to $BIN_PATH..."

    mkdir -p "$BIN_DIR"

    echo "BIN_PATH is: $BIN_PATH"
    cat > "$BIN_PATH" << EOF
#!/usr/bin/env bash
# qlpycon launcher — generated by install.sh
QLPYCON_DIR="$INSTALL_DIR"

if [[ ! -d "\$QLPYCON_DIR" ]]; then
    echo "Error: qlpycon directory not found: \$QLPYCON_DIR"
    echo "Re-run install.sh or cry :("
    exit 1
fi

cd "\$QLPYCON_DIR"
source "\$QLPYCON_DIR/venv/bin/activate"
exec python3 main.py "\$@"
EOF

    chmod +x "$BIN_PATH"
    success "Launcher written to $BIN_PATH"
}

# === PATH check ===>
check_path() {
    info "Checking \$PATH..."
    if [[ ":$PATH:" != *":$BIN_DIR:"* ]]; then
        warn "$BIN_DIR is not in your PATH."
        echo ""
        echo "               Add this to your ~/.bashrc or ~/.zshrc:"
        echo "                 export PATH=\"\$HOME/.local/bin:\$PATH\""
        echo ""
    else
	success "\$PATH is superfine"
    fi
}

# === Config ===>
setup_config() {
    if [[ ! -f "$INSTALL_DIR/qlpycon.conf" ]]; then
        if [[ -f "$INSTALL_DIR/qlpycon.conf.example" ]]; then
            cp "$INSTALL_DIR/qlpycon.conf.example" "$INSTALL_DIR/qlpycon.conf"
            success "Created $INSTALL_DIR/qlpycon.conf from example"
        fi
    fi
}

# === Main ===>

main() {
    print_banner() {
    cat <<'EOF'
                  _/
         _/_/_/  _/  _/_/_/    _/    _/    _/_/_/    _/_/    _/_/_/
      _/    _/  _/  _/    _/  _/    _/  _/        _/    _/  _/    _/
     _/    _/  _/  _/    _/  _/    _/  _/        _/    _/  _/    _/
      _/_/_/  _/  _/_/_/      _/_/_/    _/_/_/    _/_/    _/    _/
         _/      _/              _/
        _/      _/          _/_/
EOF
    }

    if command -v lolcat >/dev/null 2>&1 && [[ ${LOLCAT:-1} -eq 1 ]]; then
        {
            print_banner
            echo
            echo "    qlpycon installer"
        } | lolcat -
    else
        echo -e "${MAGENTA}"
        print_banner
        echo -e "${NC}"
        echo -e "${CYAN}    qlpycon installer${NC}"
    fi

    echo

    check_dependencies

    SOURCE=$(detect_source)

    if [[ "$SOURCE" == "repo" ]]; then
        INSTALL_DIR="$(pwd)"
        info "Running from cloned repo - using $INSTALL_DIR"
    else
        DEFAULT_DIR="$HOME/.local/share/qlpycon"
        read -p "Install directory [$DEFAULT_DIR]: " USER_DIR </dev/tty
        INSTALL_DIR="${USER_DIR:-$DEFAULT_DIR}"
        INSTALL_DIR="${INSTALL_DIR/#\~/$HOME}"
        download_and_extract
    fi

    setup_venv
    setup_config
    write_launcher
    check_path

    echo ""
    success "qlpycon installed"
    echo ""
    echo "  Edit your config:  ${INSTALL_DIR}/qlpycon.conf"
    echo "  Run:               qlpycon --list"
    echo "                     qlpycon ffa"
    echo "                     qlpycon --host tcp://1.2.3.4:28960 --password secret"
    echo ""
}

main "$@"